Tutorial To Change Your MAC Address On Windows 7 & 8

Method 1 Using Device Manager
Step 1 Open the Device Manager. First you can open Contol Panel > System and Security > System. Now you can access the Device Manager from the Control Panel. It will be located in the System and Security section if you are using Category View.
Device Manager

Step 2 Click on the Network Adapters section. In your Device Manager, you will see a list of all of the hardware installed on your computer. These are sorted into categories. Click on the Network Adapters section to see all of your installed network adapters.
Device Manager 2

Step 3 Right-click on your Network Adapter. Select Properties from the menu to open the network adapter’s Properties window.
Device Manager3

Step 4 Now Click the Advanced tab. When you click on Advance tab that time properties are open at below.
Device Manager 4

Step 5 Enter your new MAC address. When you click on Network Address that time right side open the blank box. Now write your new Mac Address in this box. But remember MAC addresses are 12-digit values, and should be entered without any dashes or colons. For example, if you want to make the MAC address “2A:1B:4C:3D:6E:5F”, you would enter “2A1B4C3D6E5F”.
Device Manager 5

Step 6 Reboot your computer to enable the changes. You can also disable and re-enable your adapter within Windows for the change to become effective without rebooting. Just sliding the Wi-Fi’s On/Off switch like the slider found on ThinkPads and VaiOs won’t satisfactorily disable/re-enable the card.
dev6

Step 7 Check that the changes took effect. Once you’ve rebooted the computer, open the Command Prompt and enter ipconfig /all and note the Physical Address of your adapter. It should be your new MAC address.
Device Manager 7

Method 2 Using Technitium MAC Address Changer
Step 1 Download & Install. First of all in your Windows PC download and install the tool Technitium MAC Address Changer. Download link available below.
Technitium 1
[wc_button type=”info” url=”https://technitium.com/tmac/” title=”Download Technitium ” target=”self” position=”center”]Download Technitium MAC Address Changer[/wc_button]

Step 2  Select your Network Adapter. When you open Technitium MAC Address Changer, you will see a list of all of your installed network devices. Select the Network adapter that you want to change the address for.
Technitium 2

Step 3 click on Random Mac Address.  Now at the below click on Random Mac Address and this will generate any random mac address for your computer that not actually belongs to your computer.
Technitium 3

Step 4 Click on Change Now button. Now at the below select Change Now button.
Technitium 4

Step 5 MAC Address was changed successfully. When you click on Change Now button that time you will see a popup message MAC Address was changed successfully.
Technitium 5

So above Post is for How to Change MAC Address in Windows 7 & 8. By this Window tricks we can change safely any windows MAC Address. Hope you like this post

Post a Comment

Post Your Comments

Previous Post Next Post

Contact Form